iturnedintoanewt

@iturnedintoanewt@lemm.ee

This profile is from a federated server and may be incomplete. For a complete list of posts, browse on the original instance.

iturnedintoanewt ,

... How? My Tubular won't open peertube links, and i have tagged all the extra links it offered in open by default

iturnedintoanewt OP ,

Thanks! I never walked through that screen yet...I'll try that!

EDIT: Seems...not to have done much. Backup keeps tracking and uploading a ton of files. Many more than what the server actually displays, as in, I've seen the backup go through pictures with dates the server doesn't seem to show. I've seen it slowly go through at least 15-20 videos for example, but the server only acknowledges a grand total of 2 video assets.

EDIT2: Oops, seems the screen eventually turned off and backup stalled...Let's see what it does now...
....aaaand back to May 25th. Yup, still the same problem here :(

iturnedintoanewt OP , (edited )

The docker container where the DB lives has still another 2GB free to go (I'll increase this). The pictures storage goes to a NAS drive with nearly 10TB of storage left. The docker container has 4GB RAM to run, only immich is running on this at this moment...I didn't seen running too high just yet.

iturnedintoanewt OP ,

I mean, the NAS is already mounted. It's an NFS share, it gets mounted at boot, and it should be just another regular folder, transparent to docker (or anything else).

iturnedintoanewt OP ,

I...Think I found the issue. A classic case of "increase max upload size on your reverse proxy". Which I thought I did...
https://lemm.ee/comment/12234368

Thanks for all the help through the process!

iturnedintoanewt ,

According to BBC (10min ago now), it now has been found, and The head of Iran's Red Crescent society has told state TV that the situation is not "good".
I guess that's all they're willing to say for now.

Handbrake queue picks wrong file?

I am not sure if anyone's experiencing this. I'm using Handbrake from a flatpak. I am recoding a whole TV show's season. So, episodes from S01E01 to E15. In the Handbrake app and queue, it really picked the 15 of them. However, when I start to process the queue...It starts by encoding ep 15? At least S01E15 the file it starts...

iturnedintoanewt OP ,

Thanks...This is truly helpful. I'm testing this method now, it seems to work. Not super convenient...But it kinda works.

iturnedintoanewt ,

How about Proxmox? It allows containers and VMs. Containers via LXC, but you could set your own VM to run docker/kubernetes etc.
Haven't had many chances to try Kuberbetes myself, so not sure the difference of advantages.

iturnedintoanewt ,

Didn't hear before from Futo voice Speech to Text, nice! I'll drop also Kaldi for FOSS Text To Speech, and Heliboard for swipe/gliding typing keyboard, Lille swiftkey or gboard..

iturnedintoanewt OP ,

Damn...Since dnf seems to be refreshed recently now, it seems not wanting to ask again, even when I run dnf update --refresh. Now it refreshes all repos without concern. But I know after a few days, it will ask again about all those repos...And I'm not sure why it does that.

iturnedintoanewt OP ,

Yes, i feel it's that one. i think there are similar prompts on debian-based distros. Thing is, I'm being prompted repeatedly for all of them.

Jellyfin: Can I disable HEVC playback on ONE device?

So, the issue at hand is, I have a Chromecast 4K with Jellyfin Android TV on it. And most of my library is x265/HEVC. But, whenever playing from this specific device, it will natively take HEVC, but with exoplayer library it plays kinda like a slideshow, at about 5-10FPS. Choosing VLC should be ok, and forcing a transcode will...

iturnedintoanewt OP ,

Thanks...I was looking onto that, but I don't think I've seen the option to always transcode x265 back to x264...Unless the device truly can't. But if it can decode, it's preferred, and I'm not sure there's an option to change that.

iturnedintoanewt OP ,

I didn't see an option to disable x265, sadly. There's a bunch of transcoding options, but seems this wasn't considered, unless the device didn't support it.

iturnedintoanewt OP ,

Thanks...but I don't want to block all other users/devices from using x265 just because that one single device :(

Amnesty: World seeing near breakdown of international law amid wars in Gaza and Ukraine ( apnews.com )

The world is seeing a near breakdown of international law amid flagrant rule-breaking in Gaza and Ukraine, multiplying armed conflicts, the rise of authoritarianism and huge rights violations in Sudan, Ethiopia and Myanmar, Amnesty International warned Wednesday as it published its annual report....

iturnedintoanewt ,

So all the other wars/CIA murders were by the book?

iturnedintoanewt OP ,

Not using apple devices, sadly.

iturnedintoanewt OP ,

Thanks...I use my own home server, so I'd try to avoid the VPS part if I can, and directly re-address it to the home server, as I already have that one with a working fixed domain etc.

iturnedintoanewt OP ,

I...logged a ticket with them, they promised they'd get back to me within 48h. I'm not holding my hopes too high.

iturnedintoanewt OP ,

Thanks...I think I have now both containers in the home and remote servers within the tailscale network, showing their own IPs. This will make the site accessible via SSH, if I get this right. I'm not sure though how to route whichever remote server I build to the home network

iturnedintoanewt OP ,

THanks...I haven't tried Tailscale yet, I think I'll get the "easier" commercial version just yet for this. Still learning on this.

iturnedintoanewt , (edited )

LOOK AT MY HORSE, MY HORSE IS AMAZING

Edit: oh... And this

iturnedintoanewt ,

Trust me... The writing is very much with the same dark/silly humor as the game. You even get characters ignoring their main quests and going to clear side quests.

iturnedintoanewt ,

Is there an imsorryjon in lemmy?

iturnedintoanewt ,

How do you disable them?

iturnedintoanewt ,

Perfect I'll try this thank you!

iturnedintoanewt ,

Thanks! For Android i use newpipe.

Basic docker networking?

Hi guys! I'm going at my first docker attempt...and I'm going in Proxmox. I created an LXC container, from which I installed docker, and portainer. Portainer seems happy to work, and shows its admin page on port 9443 correctly. I tried next running the image of immich, following the steps detailed in their own guide....

iturnedintoanewt OP ,

Sure...But proxmox is already there. It's installed and it runs 5VMs and about 10 containers.
...I'm not going to dump all that just because I need docker...and I'm not getting another machine if I can get use that. So...sure, there might be overhead, but I saw some other people doing it, and the other alternative I saw was running docker on a VM...which is even more overhead. And I fear running it on the proxmox server bare metal, it might conflict with how it manages the LXC containers.

iturnedintoanewt OP ,

Thanks...So you think a full VM will result in less overhead than a container? How so? I mean, the VM will take a bunch of extra RAM and extra overhead by running a full kernel by itself...

iturnedintoanewt OP ,

Thanks! When I type my LXC's IP:2283, I get unable to connect. I checked the docker-compose.yml and the port seems to be 2283:3001, but no luck at either. Is there anything that needs to be done on docker's network in order to..."publish" a container to the local network so it can be seen? Or any docker running with a port can be reached via the host's IP with no further config? Checking the portainer's networks section, I can see an 'immich-default' network using bridge on 172.18.0.0/16, while the system's bridge seems to be running at 172.17.0.0/16. Is this the correct defaults? Should I change anything?

Thanks!

iturnedintoanewt OP ,

Thanks! When I type my LXC's IP:2283, I get unable to connect. I checked the docker-compose.yml and the port seems to be 2283:3001, but no luck at either. Is there anything that needs to be done on docker's network in order to..."publish" a container to the local network so it can be seen? Or any docker running with a port can be reached via the host's IP with no further config? Checking the portainer's networks section, I can see an 'immich-default' network using bridge on 172.18.0.0/16, while the system's bridge seems to be running at 172.17.0.0/16. Is this the correct defaults? Should I change anything?

Thanks!

iturnedintoanewt OP ,

Thanks! When I type my LXC's IP:2283, I get unable to connect. I checked the docker-compose.yml and the port seems to be 2283:3001, but no luck at either. Is there anything that needs to be done on docker's network in order to..."publish" a container to the local network so it can be seen? Or any docker running with a port can be reached via the host's IP with no further config? Checking the portainer's networks section, I can see an 'immich-default' network using bridge on 172.18.0.0/16, while the system's bridge seems to be running at 172.17.0.0/16. Is this the correct defaults? Should I change anything?

Thanks!

iturnedintoanewt OP ,

Thanks...I did follow their guide, step by step. The only thing that I customized was the immich uploads folder, which I want it to go to my NAS. I have it set up on an NFS mount handled by proxmox, and then it's just a transparent bind mount in the LXC. The user in the lxc container has read/write access to this location, and docker runs on this same user. But I reckon I'm addressing this in docker in a horribly messed way, as I've never used it before. Checking the docker logs immich_server, I'm getting this:

[Nest] 7  - 04/08/2024, 9:53:08 AM     LOG [SystemConfigService] LogLevel=log (set via system config)
node:fs:1380
  const result = binding.mkdir(
                         ^

Error: EACCES: permission denied, mkdir 'upload/library'
    at mkdirSync (node:fs:1380:26)
    at StorageRepository.mkdirSync (/usr/src/app/dist/repositories/storage.repository.js:112:37)
    at StorageService.init (/usr/src/app/dist/services/storage.service.js:30:32)
    at ApiService.init (/usr/src/app/dist/services/api.service.js:72:29)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
    at async ApiModule.onModuleInit (/usr/src/app/dist/app.module.js:58:9)
    at async callModuleInitHook (/usr/src/app/node_modules/@nestjs/core/hooks/on-module-init.hook.js:51:9)
    at async NestApplication.callInitHook (/usr/src/app/node_modules/@nestjs/core/nest-application-context.js:223:13)
    at async NestApplication.init (/usr/src/app/node_modules/@nestjs/core/nest-application.js:100:9)
    at async NestApplication.listen (/usr/src/app/node_modules/@nestjs/core/nest-application.js:169:33) {
  errno: -13,
  code: 'EACCES',
  syscall: 'mkdir',
  path: 'upload/library'

Let's see... So let's say my LXC container has a /mnt/NAS-immich-folder path, already mounted and with rw permissions. Then I edited my docker-compose.yml volumes line as follows:

    volumes:
      - /mnt/NAS-immich-folder:/mnt/immich
      - ${UPLOAD_LOCATION}:/mnt/immich
      - /etc/localtime:/etc/localtime:ro

And my .env path looks like:

# The location where your uploaded files are stored
UPLOAD_LOCATION=/media/immich

...I'm sure I'm doing something horribly wrong besides the no-no of docker over LXC...Is there anything messed in these paths? What am I doing wrong? Thanks so much!

iturnedintoanewt OP ,

Yeah, the ones being VMs cannot be transferred easily to containers...I would have done so over to LXC, as it's been my preferred choice until now. But Home Assistant was deployed over a VM template provided by HA, and the windows VMs...well, they're Windows. I also have an ancient nginx/seafile install that I'm a bit afraid to move to LXC, but at some point I'll get to it. Having Immich for pictures would reduce a bit the size of some of the Seafile libraries :)

iturnedintoanewt OP , (edited )

Wow thanks! Let me take a look, I missed the portainer part!
Sigh...I followed through the instructions. I deleted the previous stack, and created a new one, this time all the way from portainer. This time I ONLY modified the .env file, well and according to the instructions the .yaml referring to the .env as stack.env now. Made it deploy...and nothing. Still getting the same mkdir error :(

iturnedintoanewt OP ,

Thanks! Seems more about how to properly map a local host path/mount on docker. For which I'm completely noob...I think this is where I'm failing right now.

Any "smart" Gallery app?

Hi guys! Is there any smart gallery app that can help tag/search the gallery pictures through automatically created tags, such as objects/things recognized in the pictures, locations etc? This is a rather convenient feature in some apple and samsung phones, which I think would be nice to have...But I reckon must consume some...

iturnedintoanewt ,

More so than Lineage? I never heard of them.

iturnedintoanewt ,

I'm sure she knows she's not gonna win. Now. But i doubt that was her endgame. You need to think about the next and next-next election. This puts her in the game.

iturnedintoanewt ,

If the BBC article is right, he might get some loans considering he might get a rather good leverage with Truth Social stock...
https://www.bbc.com/news/business-68609007

iturnedintoanewt ,

And then you have to choose the user and go through the login screen/PIN. I mean you can be done in 10-15 seconds each time, but it's for something as frequently used as a chat app, it really breaks the workflow each time you need go switch apps/users, as compared to, say, hitting the navigation button to switch app twice.

iturnedintoanewt ,

I reckon there should be a way to keep both sessions logged in and more easily changeable. I mean, I asked and apparently they are running simultaneously and without pausing when you switch.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • test
  • worldmews
  • mews
  • All magazines
    •