jasoncoon ,
@jasoncoon@leds.social avatar

This giant Fibonacci flower was the best kind of collaboration, as @maketvee did all of the work!
It has 128 rings, each with 8 LEDs, for a total of 1024 LEDs. He split it into an inner "FiboBlade" disc and 21 "FiboNanas" that lock into place and mount using soldered header pins.
More details ⬇️🧵

The center FiboBlade disc connected to a PixelBlaze LED controller. The LEDs on the FiboBlade are lit up in a gradient of colors.
The Fibonacci Flower fully assembled and lit up. The 21 FiboNanas are attached to the central FiboBlade disc, radiating outward. The whole assembly resembles a flower.
The back of the assembly, showing wires connecting the various parts.

A photo of black PCBs laying on a white table. The PCB on the right is a jagged, sawblade looking disc with sharp points around the outside. It's covered in LEDs arranged into rings of eight, with the rings arranged into a Format spiral, like the center of a sunflower. The PCBs on the left are arcs, with four of the same rings of eight LEDs on each arc. They're panelized, with five arcs per panel. Also on the table are some Haribo brand gummy candies, some 3D printed parts, screws, etc.
ALT
  • Reply
  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • test
  • worldmews
  • mews
  • All magazines
    •