lal309

@lal309@lemmy.world

This profile is from a federated server and may be incomplete. For a complete list of posts, browse on the original instance.

What am I dealing with? ( lemmy.world )

Cherry and beefsteak tomatoes. Noticed on the beefsteak first. It started at the top of the plant and worked its way down. Today I went out to do my usual watering and checking on everything and noticed that my cherry tomatoes were showing the same type of wilting. Tomatoes are growing relatively well and the leaves are not...

lal309 OP ,

Here’s a picture of the cherry tomatoes.
https://lemmy.world/pictrs/image/e8270aa8-3589-45d1-9966-8e07fef6b3f3.jpeg

lal309 OP ,

For the last few days, 100 degrees. Full sun (8am - 6pm). As they were getting established (it’s a new raised bed), I watered daily. Lately I’ve been trying to water every other day depending on how the soil on top looks. I added some compost about a month or so ago. As far as the little bugs, I don’t think I have seen them but I also haven’t been looking.

lal309 OP ,

I will check this tonight but I believe they remain the same even after the sun has gone down.

lal309 OP ,

So I looked around the plant and under leaves and I don’t see any green or white bugs. I see some spider webs here and there but I don’t think that’s harmful.

lal309 OP ,

So I’ve been just searching on Google and some of the articles I’m finding suggest that my plant has blight. Is this way off base?

lal309 OP ,

My apologies I mean to say bacterial wilt not blight.

lal309 ,

Following. Sounds interesting.

lal309 ,

Lemme fix the headline for you.

HashiCorp joins the list of companies and software killed by IBM.

lal309 OP ,

Simple solution. I like it! Although I think it will get lost in the sea of daily emails….

lal309 OP ,

After you mentioned it, I looked it up too and stumbled on a similar answer to that link. Thanks!

lal309 OP ,

Was not aware of Diun, will check out!

lal309 OP ,

Interesting… do you like this way more or the rss route more?

lal309 OP ,

This sounds like the simplest and most effective solution. Thanks!

lal309 OP ,

Love that username tho!! Yeah might just do RSS. I already run FreshRSS and it’s ability to filter stuff would probably come in handy too

lal309 OP ,

This looks interesting too

Assistance migrating from gitea to forgejo

Hi. I self-host gitea in docker and have a few repos, users, keys, etc. I installed forgejo in docker and it runs, so I stopped the container and copied /var/lib/docker/volumes/gitea_data/_data/* to /var/lib/docker/volumes/forgejo_data/_data/, but when I restart the forgejo container, forgejo doesn't show any of my repos, users,...

lal309 , (edited )

Okay so your post inspired me to make the switch. All I had to do was switch out the image to the forgejo one. Everything worked right away. To try to make things as clean as possible, I went ahead and renamed my bind volume paths and app.ini stuff from gitea to forgejo but no matter what I tried, once I started the container, the container would create a gitea directory with a new app.ini. I even tried to run the forgejo compose on another host and the app still creates a gitea directory within the bind mount. Am I doing something wrong. I understand it’s a drop in replacement but I’m sure there’s a way to get a cleaner cut over.

compose.yml

volumes:

  • ./data:/data

Host directories

~/forgejo

  • data
    - forgejo - renamed for the migration
    - git
    - ssh
    - gitea - gets created by the app no matter what I do or what paths are set in app.ini
  • compose.yml

How do I keep forgejo from creating this gitea directory? Why doesn’t it create a forgejo directory???

Edit: gitea version was - 1.21.7 and forgejo replacement image is 1.21.7-0

lal309 ,

Not quiet. I was running gitea before so my mount was ./gitea:/data but since switching over to forgejo, I renamed my ./gitea directory to ./forgejo. Adjusted my compose file to have a mount of ./forgejo:/data.

Now inside of that renamed forgejo directory, there are a bunch of gitea references and even one more directory called gitea. When I migrated everything worked right away but since I wanted a cleaner transition, I renamed and switched all gitea references to forgejo but went I brought the stack back online, it went belly up.

As a troubleshooting step, I recreated my compose file and created a new empty ./forgejo on a different machine just to see what a new and fresh install would look like and the forgejo stack itself created all kinds of gitea references and gitea directory once I brought it up. So to fix my original deployment, I reverted all the references back from forgejo to gitea and everything worked again.

For fun, I went out to codeberg to look at the Dockerfile and saw that they had a bunch of gitea things within their own Dockerfile so nothing I can do for now

lal309 OP ,

Great suggestion. Not sure why I didn’t think of it. It’s one of my first stops for this kind of stuff. I did check out this site which is how I found Akaunting.

lal309 OP ,

Just to be clear I just need to track my sales/revenue (even if input is manual) and track expenses (bonus if I could upload a picture of a receipt).

I don’t need to actually send an invoice (I do this straight from my website and it’s a seamless integration so not looking to reinvent this wheel, yet!)

Given the above, is in InvoiceNinja still a good candidate?

lal309 OP ,

Need this to be accidente to my lan with the primary being non technical. Thanks for the suggestion anyways tho

lal309 OP ,

Copy/paste from another comment

“Just to be clear I just need to track my sales/revenue (even if input is manual) and track expenses (bonus if I could upload a picture of a receipt).

I don’t need to actually send an invoice (I do this straight from my website and it’s a seamless integration so not looking to reinvent this wheel, yet!)

Given the above, is in InvoiceNinja still a good candidate?”

lal309 OP ,

This does look super nice but I need to have it centralized. We use multiple devices to do various things and will need to access this from all machines. So close!!!

lal309 OP ,

I’m in the US but it does look like a very good candidate. Thanks!

lal309 OP ,

Actually, I’m curious as to why you mention Europe specifically?

Should I learn Docker or Podman?

Hi, I've been thinking for a few days whether I should learn Docker or Podman. I know that Podman is more FOSS and I like it more in theory, but maybe it's better to start with docker, for which there is a lot more tutorials. On the other hand, maybe it's better to straight up learn podman when I don't know any of the two and...

lal309 ,

Honestly, if you have never used containers before I would suggest starting with docker as it has more readily accessible beginner walk through and tutorials. From there, you will have a good idea as to switching to podman is the right move for you or not.

Personally, I started with docker and haven’t moved from there since I don’t see a need (yet). I have dozens of services running on docker. I don’t know how heavy of a lift it would be to learn podman but like I said, I don’t feel the need to do so.

Maybe try out both and see which one you like more?

lal309 ,

Well sh.t… now I got a weekend project hahah

lal309 OP ,

I believe you are referencing the same post that got my curious about Incus and started playing around with it.

My biggest gripe is the manual installation of all services which I will do if it’s worth it. So far not sure that it is, hence the post to get more opinions.

There’s is a GUI you can install for Incus but it’s optional and not preinstalled.

I appreciate your input.

lal309 OP ,

You are probably right. Judging by their GitHub repo, their first release was in October of 2023. If I understand correctly, Incus is a fork of Canonical LXDs which is not so new??? Idk. Their documentation is quite good but there aren’t a lot of “guides” out there so yea.

lal309 OP ,

Thank you I appreciate your input!

lal309 OP ,

Haven’t really looked into Podman as I read somewhere (if I remember correctly) that it takes quite a bit of rewrite (from docker compose to podman). Again, might be speaking out of turn here.

lal309 OP ,

Very true! Thanks.

lal309 OP ,

Strictly from a container perspective, wouldn’t this workflow create more overhead? For example, an incus cluster for me it would be Debian hosts (layer 1), incus (layer 2), lxd container (layer 3), docker (layer 4), app/service (layer 5). A Docker Swarm cluster (for me) would be Debian hosts (layer 1), docker (layer 2), app/service (layer 3).

Granted a docker swarm cluster would negate the possibility of VMs without having to install something else on the hosts but asking since I’m trying to keep my services in containers.

lal309 OP ,

Fair point. I’m most familiar with docker and proxmox. Sorta doing it for educational purposes but I also have critical services (critical to me) running that must be available.

lal309 OP ,

That’s another fair point. I do have a couple of pi’s collecting dust. As someone else stated, I need to consider the time it takes me to get up to speed with incus. Can you elaborate on your experience going “from 0 to hero” with incus? Just curious.

lal309 OP ,

Well that’s kinda why I came here to the greater community as I wasn’t really sure if there would be any performance gains or other upsides I’m not aware of. Based on general feedback, it appears that there’s no clear upside to incus.

lal309 OP ,

Interesting tidbit about the performance. It has been a bit of challenge getting “up to speed” with Incus/LXD from a guide and walkthrough perspective. Although I do find their documentation pretty well organized and useful.

lal309 OP ,

Actually pretty helpful!

lal309 ,

This video helped me most. I’m a visual learner so it was easier for me to follow this instead of a written guide. Just be careful when you are following along tutorials (especially those written more than ~9 months ago) because the majority use syntax for OpenSSL 1.1.1 but that version is now EOL. You will need to use OpenSSL 3.x syntax as it’s the currently supported version of OpenSSL.

lal309 ,

Just went searching for something like this as my wife wanted to start a “journal”. The requirements were simple, private, nothing too crazy complicated to use, web interface, easy setup and tear down (in case she didn’t like it). Started up an instance of Ghost, way overkill, was looking at WriteFreely, stood up an instance of Bookstack. She’s trying it out now, nothing bad to report so far. The hierarchy is a bit confusing to grasp but when you put it in the context of something like shelve = My Journal, Book= 2023 Vacation or 2023 or Homeschooling, Chapters = 1st week of Vacation or First year Homeschool, Pages = Todays date. It started clicking with her a bit more. If you find something better, please report back!

lal309 ,

Well she stopped using it so I deleted the instance (just too busy with small children). For the time that she was using it Bookstack seemed to have me her needs once a cohesive breakdown was established (translating Bookstack hierarchy and matching it up with her topics).

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • test
  • worldmews
  • mews
  • All magazines
    •