Was trying out a new stitch to attach leather to my 3D Printed part. I love the results ( lemmy.world )
Here is the reverse side:
https://lemmy.world/pictrs/image/a0f78289-f44b-4b16-ad49-d936391661e0.jpeg
For the long and short of what this is. I make 3D Printable e-reader cases that are held together by stitching cloth or leather. Up to now the cover had the magnet as a part of the design, but with no way to upgrade or change it out. This is my solution for that.
With 8 screws and a tight fit, the cover can be swapped out when you upgrade or change out your e-reader. That way you can keep the case itself and just upgrade the components you need when you need it.
Still testing it, but very happy with how it turned out.
![](https://mbin.grits.dev/media/cache/resolve/entry_thumb/24/c0/24c08b718663ebaa0402ff7dd966181c390e43830d69dbf5407ceebc105c74f1.jpg)