wildbus8979 , 1 month ago (edited 1 month ago) You should be good to go. Make sure vfio is loaded in the modules-load.d vfio vfio_iommu_type1 vfio_pci vfio_virqfd Make sure the module options are set correctly and the kernel module is blacklisted in /etc/modprobe.d/vfio.conf options vfio-pci ids=1000:0097 blacklist MODULE_NAME Make sure.IOMMU is enabled in your kernel command line (ex via grub): intel_iommu=on iommu=pt This is probably not complete, but it should get you pretty far into allowing you to add the pci device in the hardware config of your vm
You should be good to go. Make sure vfio is loaded in the modules-load.d
vfio vfio_iommu_type1 vfio_pci vfio_virqfd
Make sure the module options are set correctly and the kernel module is blacklisted in /etc/modprobe.d/vfio.conf
/etc/modprobe.d/vfio.conf
options vfio-pci ids=1000:0097 blacklist MODULE_NAME
Make sure.IOMMU is enabled in your kernel command line (ex via grub): intel_iommu=on iommu=pt
intel_iommu=on iommu=pt
This is probably not complete, but it should get you pretty far into allowing you to add the pci device in the hardware config of your vm